Adaptador Telefónico Analógico (ATA), x2 FXS y 1 puerto 10/100Mbs
zoom_out_map
chevron_left chevron_right

Adaptador Telefónico Analógico (ATA), x2 FXS y 1 puerto 10/100Mbs

 

47,68 € Impuestos incluidos

39,41 € Impuestos excluidos

new_releases Este producto no esta en stock puede recibirlo en un plazo aproximado

Enviando, espera por favor...

¡Tu pregunta ha sido enviada! Te contestaremos tan pronto como sea posible.

¡Lo siento! Ha ocurrido un error enviando tu pregunta.



Características Destacadas

Product Specifications

Data networking

- MAC address (IEEE 802.3)

- IPv4 (RFC 791) upgradeable to IPv6 (RFC 1883)

- Address Resolution Protocol (ARP)

- Domain Name System (DNS) A record (RFC 1706) and SRV record (RFC 2782)

- Dynamic Host Configuration Protocol (DHCP) client (RFC 2131)

- Point-to-Point Protocol over Ethernet (PPoE) client (RFC 2516)

- Internet Control Message Protocol (ICMP) (RFC 792)

- TCP (RFC 793)

- User Datagram Protocol (UDP) (RFC 768)

- Real Time Protocol (RTP) (RFC 1889) (RFC 1890)

- Real Time Control Protocol (RTCP) (RFC 1889)

- VLAN tagging (IEEE 802.1p)

- Simple Network Time Protocol (SNTP) (RFC 2030)

- SIP channels support for both UDP and TCP transport

Voice gateway

- SIPv2 (RFC 3261, 3262, 3263, and 3264)

- SIP proxy redundancy: Dynamic through use of DNS SRV A records

- Reregistration with primary SIP proxy server

- SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN])

- Highly secure (encrypted) calling using Secure RTP (SRTP)

- Codec name assignment

- G.711 (A-law and µ-law)

- G.726 (32 kbps)

- G.729 A

- Dynamic payload

- Adjustable audio frames per packet

- Dual-tone multifrequency (DTMF): In-band and out-of-band (RFC 2833) (SIP information)

Voice features

- Independent configurable dial plans with interdigit timers and IP dialing (1 per port)

- Call progress tone generation

- Jitter buffer: Adaptive

- Frame loss concealment

- Full-duplex audio

- Echo cancellation (G.165 and G.168)

- Voice activity detection (VAD)

- Silence suppression

- Comfort noise generation (CNG)

- Attenuation and gain adjustments

- Flash hook timer

- Message waiting indicator (MWI) tones

- Visual messaging waiting indicator (VMWI) using frequency shift keying (FSK)

- Polarity control

- Hook flash event signaling

- Caller ID generation (name and number): Bellcore, DTMF, and European Telecommunications Standards Institute (ETSI)

- Streaming audio server: Up to 10 sessions

- Music on hold

- Call waiting, call waiting and caller ID

- Caller ID with name and number

- Caller ID blocking

- Selective and anonymous call rejection

- Call forwarding: No answer, busy, and all

- Do not disturb

- Call transfer, call return, and call back on busy

- Three-way conference calling with local mixing

- Per-call authentication and associated routing

- Call blocking with toll restriction

- Distinctive ringing: Calling and called number

- Off-hook warning tone

- Advanced inbound and outbound call routing

- Hotline and warmline calling

- Long silence (configurable time setting) silence threshold

- Disconnect tone (for example, reorder tone)

- Configurable ring frequency

- Ring validation time setting

- Tip and ring voltage adjustment setting

- Ring indication delay setting

Fax capability

- Fax tone detection pass-through

- Fax pass-through using G.711

- Real-time fax over IP using T.38 fax relay (T.38 support is dependent on fax machine and network and transport resilience)

Security

- Password-protected system reset to factory default

- Password-protected administrator and user access authority

- Provisioning, configuration, and authentication

- HTTPS with factory-installed client certificate

- HTTP digest: Encrypted authentication using MD5 (RFC 1321)

- Up to 256-bit Advanced Encryption Standard (AES) encryption

- SIP Transport Layer Security (TLS)

Provisioning, administration, and maintenance

- Web browser administration and configuration using integral web server

- Telephone keypad configuration with interactive voice prompts

- Automated provisioning and upgrade using HTTPS, HTTP, and Trivial File Transfer Protocol (TFTP)

- TR-069

- Asynchronous notification of upgrade availability using Notify

- Nonintrusive, in-service upgrades

- Report generation and event logging

- Statistics in Bye message

- Debug server records and syslog: Per-line configurable web browser

- Ping and traceroute diagnostics

- Configuration management: Backup and restore

- Support for Bonjour

Physical interfaces

- 1 WAN 100BASE-T RJ-45 Ethernet Port (IEEE 802.3)

- 2 RJ-11 FXS phone ports for analog circuit telephone device (tip and ring)

- Reset button

Power supply

- DC input voltage: 5V DC at 2.0A maximum

- Power consumption: 5W

- Switching type (100-240V) automatic

- Power adapter: 100-240V and 50-60 Hz (26-34 VA) AC input, with 1.8m cord

Indicator lights and LEDs

- Phone 1, phone 2, Internet, and power

 

 width=
 
CISCO
SPA112
8479562277199